YMK-VS double-station CNC cutting and drilling center
The YMK-VS combines panel nesting and vertical drilling across two work zones for furniture factories that want more work completed before downstream processing.
YMK-VS is intended for cutting, routing and vertical drilling in one CNC stage. Two work zones can help loading and machining overlap, but output should be measured with the buyer's full program and handling method.
Nesting and vertical drilling in one production route.
The catalog describes two stations working for higher efficiency, with nesting and vertical drilling functions intended for panel-furniture production.
Organize panel processing across two zones for a more continuous operating sequence.
Combine shape processing, panel cutting and drilling tasks in the stated configuration.
The catalog references cabinet and wardrobe software interfacing for material utilization.
Catalog values for YMK-VS.
Verify all values and included options in the final quotation.
| Effective travel | 2500 × 1260 × 200 mm |
|---|---|
| Maximum working size | 2480 × 1230 × 200 mm |
| Table size | 2500 × 1230 mm |
| Table structure | Vacuum adsorption |
| Transmission | X/Y rack, Z screw |
| Spindle power | 4.5 & 6 kW |
| Spindle speed | 18,000 r/min |
| Moving speed | 60 m/min |
| Maximum working speed | 18 m/min |
| Voltage | AC 380 V / 3 PH / 50 Hz |
YMK-VS specification, evidence and buyer checks.
The table separates published catalog facts from items that need current factory confirmation. Use it as a quotation and inspection checklist.
| Specification | Published or required value | Evidence / buyer action |
|---|---|---|
| Effective travel | 2500 × 1260 × 200 mm | Supplied catalog |
| Maximum working size | 2480 × 1230 × 200 mm | Supplied catalog |
| Table size | 2500 × 1230 mm | Supplied catalog |
| Table structure | Vacuum adsorption | Supplied catalog |
| Transmission | X/Y rack, Z screw | Supplied catalog |
| Spindle power | 4.5 & 6 kW | Supplied catalog |
| Spindle speed | 18,000 r/min | Supplied catalog |
| Moving speed | 60 m/min | Supplied catalog |
| Maximum working speed | 18 m/min | Supplied catalog |
| Electrical supply | AC 380 V / 3 PH / 50 Hz | Supplied catalog; confirm destination build |
What the quotation should include
YMK-VS CNC center questions
What is the advantage of two working stations?
Two work zones can let an operator prepare one area while the other is in process. The benefit depends on part size, program time, safety logic and the loading method.
Can YMK-VS drill cabinet assembly holes?
It is configured for vertical drilling. Horizontal edge holes still require a side-hole machine or a six-sided drilling process.
What working range is listed for YMK-VS?
The catalog lists a maximum working size of 2480 × 1230 × 200 mm and effective travel of 2500 × 1260 × 200 mm.
How should a buyer compare YMK-VS output?
Run the same nested sheet on each proposed machine and time loading, positioning, every machining operation and unloading. Rapid speed is not finished-panel output.
Share the panel workflow you want to automate.
Send board size, hole patterns, nesting software, output target, voltage and destination.